The EP Greenhouse geared motor is a compact and lightweight reduction gear motor with an integrated limit switch system that’s ideal for assembly of a locally available electric electric motor. The gearbox is used in manually-controlled or climate-managed ventilation and screen systems in greenhouses. The quick and easy-to-install EP gear motor is definitely rainproof and windproof. The gear reducer has a high protection class (IP65) and can be used within an ambient temperature of 0-60 °C.
The low-noise gear motor for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel transmission means that the drive shaft is usually locked when the decrease geared motor isn’t running. The fully sealed reduction gear motor has an growth chamber with a diaphragm to keep the gear essential oil at a low pressure under all situations, even at high temps. Thanks to the utilization of an growth chamber, the geared motor can be installed in any placement. There are no limitations, since there is no need for a bleed plug. The sealed reduction reducer keeps the apparatus oil of the reducer in optimum condition because of its entire operating life time. The gearbox is ideal for discontinuous use, working course s3-30%, with a maximum activation period of 25 minutes.
The Gear box reduction geared motor has an FT85 motor assembly flange, on to which the right IEC standard motor can easily be installed (EN 50347).
The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit change system is installed within an built-in chamber and is certainly enclosed by an impact-resistant plastic cover. The limit switch system is obtainable and easy to adjust. The limit switch system’s optimum switching range is definitely 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The reducer comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The gearbox for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.
Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of app of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temps of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, optimum activation time 25 minutes.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching selection of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).