Product Description

Product Description

Straight line shaft is a merchandise that can be made into straight line motion since of the guiding function of sliding bearing.

The required conditions of linear motion system are: easy design, ideal performance, low maintenance expense, durable materials, large-frequency heat remedy, exact
Outside diameter dimensions, roundness, accurate flatness and floor remedy, etc.
Design type: diameter 5- 607
The content of carbon metal
Hardness HRC60 ± 2
Hardening thickness
.8 mm – 3 mm
Size -6000mm (if you require more than 6000mm, we can reverse relationship for you)
Precision g6
The roughness is inside 1.5μm
Straightness 1.5μm 100mm (Rmax)
Other straight shaft varieties reliable shaft, hollow shaft, threaded shaft, stainless steel shaft
Other materials bearing steel GCr15, carbon steel forty five#, SUS440C
We are a expert bearing maker in China, higher quality bearings can be custom-made according to OEM and in accordance to your needs

Assortment of software

 

1. The reliable shaft

Generally applicable to industrial robots, as professional measuring devices, medical devices, precision equipment instruments, aircraft shafts, pneumatic mandrel shifting components.

2. The hollow shaft

With the benefits of minimizing the weight and simplifying the construction of the gear, the interior measuring wire, compressed air, and lubricating oil and hydraulic oil can be worn yet again.

3, stainless metal shaft

Usually suited for chemical substances, seawater and so on

Utilized as portion of a measurement in the presence of a compound.

Specific processing shaft following heat treatment ending, all types are challenging chrome plated automation tools.
 

Special processing

one.The length of the

We can offer straight spools with diameters φ5mm-φ150mm. Maximum size up to 6000 mm.

When you have special requirements for duration, we can satisfy your processing requirements of distinct lengths.

When you demand more than 6000mm, we can reverse link for you.

2. Unique processing

When you have specific needs for processing. Such as thread, with the shaft gap drilling tapping, radial hole drilling tapping, shaft diameter diameter, etc., we can approach for you, these specific machines after warmth therapy and challenging chromium treatment method, to make sure the accuracy of merchandise.

Send your detailed sketches or blueprints to us for quotation and motion, reply to us after you discover our manufacturing unit value ideal for processing.
 

Detailed Images

Business Profile

 

ZHangZhoug HangZhou KaiYaDe bearing co., LTD. Is a have numerous a long time experience of linear motion merchandise skilled companies. We specialised in the manufacturing of straight axis, linear guide, ball screw, linear bearings, linear information, ball screw stop help, linear guide, CAM follower and of good good quality and competitive value. My company is positioned in HangZhou city, zHangZhoug province, near to HangZhou port and HangZhou city.
Products are extensively used in precision machinery, physical fitness tools, printing machinery, packaging machinery, health-related equipment, food equipment, textile equipment and related equipment. Goods offer properly in North America, Western Europe, Australia, southeast Asia, the Middle East, South The usa and other areas.

FAQ

one. Are you a manufacturing unit or trading business?
We are the most competitive cost and large high quality skilled manufacturers, has 12 several years of knowledge.
two. What is your item variety?
Specializing in the production of straight axis, linear bearings, linear guide, linear information, ball screw, linear motion unit such as CAM follower.
3. Do you offer OEM&ODM service?
B: indeed. Welcome OEM, ODM
4. How can I get some samples?
We are extremely honored to give samples. You need to have to pay out the freight and some sample fee.
five. How is the good quality handle of your manufacturing facility?
We uphold the tenet of “top quality is the future”, we have passed CE certification, we have strict quality handle techniques.
6. How can I get quotation?
You can ship beneath quotation or ship electronic mail to us. You can contact us directly by TM or WhatsApp and Skype as you like. If you have an crisis, make sure you contact us at any time.
 

 

Pay a visit to the Factory surroundings

 

How to Identify a Faulty Drive Shaft

The most common problems associated with automotive driveshafts include clicking and rubbing noises. While driving, the noise from the driver’s seat is often noticeable. An experienced auto mechanic can easily identify whether the sound is coming from both sides or from one side. If you notice any of these signs, it’s time to send your car in for a proper diagnosis. Here’s a guide to determining if your car’s driveshaft is faulty:
air-compressor

Symptoms of Driveshaft Failure

If you’re having trouble turning your car, it’s time to check your vehicle’s driveshaft. A bad driveshaft can limit the overall control of your car, and you should fix it as soon as possible to avoid further problems. Other symptoms of a propshaft failure include strange noises from under the vehicle and difficulty shifting gears. Squeaking from under the vehicle is another sign of a faulty driveshaft.
If your driveshaft fails, your car will stop. Although the engine will still run, the wheels will not turn. You may hear strange noises from under the vehicle, but this is a rare symptom of a propshaft failure. However, you will have plenty of time to fix the problem. If you don’t hear any noise, the problem is not affecting your vehicle’s ability to move.
The most obvious signs of a driveshaft failure are dull sounds, squeaks or vibrations. If the drive shaft is unbalanced, it is likely to damage the transmission. It will require a trailer to remove it from your vehicle. Apart from that, it can also affect your car’s performance and require repairs. So if you hear these signs in your car, be sure to have it checked by a mechanic right away.

Drive shaft assembly

When designing a propshaft, the design should be based on the torque required to drive the vehicle. When this torque is too high, it can cause irreversible failure of the drive shaft. Therefore, a good drive shaft design should have a long service life. Here are some tips to help you design a good driveshaft. Some of the main components of the driveshaft are listed below.
Snap Ring: The snap ring is a removable part that secures the bearing cup assembly in the yoke cross hole. It also has a groove for locating the snap ring. Spline: A spline is a patented tubular machined element with a series of ridges that fit into the grooves of the mating piece. The bearing cup assembly consists of a shaft and end fittings.
U-joint: U-joint is required due to the angular displacement between the T-shaped housing and the pinion. This angle is especially large in raised 4x4s. The design of the U-joint must guarantee a constant rotational speed. Proper driveshaft design must account for the difference in angular velocity between the shafts. The T-bracket and output shaft are attached to the bearing caps at both ends.
air-compressor

U-joint

Your vehicle has a set of U-joints on the driveshaft. If your vehicle needs to be replaced, you can do it yourself. You will need a hammer, ratchet and socket. In order to remove the U-joint, you must first remove the bearing cup. In some cases you will need to use a hammer to remove the bearing cup, you should be careful as you don’t want to damage the drive shaft. If you cannot remove the bearing cup, you can also use a vise to press it out.
There are two types of U-joints. One is held by a yoke and the other is held by a c-clamp. A full ring is safer and ideal for vehicles that are often used off-road. In some cases, a full circle can be used to repair a c-clamp u-joint.
In addition to excessive torque, extreme loads and improper lubrication are common causes of U-joint failure. The U-joint on the driveshaft can also be damaged if the engine is modified. If you are driving a vehicle with a heavily modified engine, it is not enough to replace the OE U-joint. In this case, it is important to take the time to properly lubricate these components as needed to keep them functional.

tube yoke

QU40866 Tube Yoke is a common replacement for damaged or damaged driveshaft tubes. They are desirably made of a metallic material, such as an aluminum alloy, and include a hollow portion with a lug structure at one end. Tube yokes can be manufactured using a variety of methods, including casting and forging. A common method involves drawing solid elements and machining them into the final shape. The resulting components are less expensive to produce, especially when compared to other forms.
The tube fork has a connection point to the driveshaft tube. The lug structure provides attachment points for the gimbal. Typically, the driveshaft tube is 5 inches in diameter and the lug structure is 4 inches in diameter. The lug structure also serves as a mounting point for the drive shaft. Once installed, Tube Yoke is easy to maintain. There are two types of lug structures: one is forged tube yoke and the other is welded.
Heavy-duty series drive shafts use bearing plates to secure the yoke to the U-joint. All other dimensions are secured with external snap rings. Yokes are usually machined to accept U-bolts. For some applications, grease fittings are used. This attachment is more suitable for off-road vehicles and performance vehicles.
air-compressor

end yoke

The end yoke of the drive shaft is an integral part of the drive train. Choosing a high-quality end yoke will help ensure long-term operation and prevent premature failure. Pat’s Driveline offers a complete line of automotive end yokes for power take-offs, differentials and auxiliary equipment. They can also measure your existing parts and provide you with high quality replacements.
A U-bolt is an industrial fastener with threaded legs. When used on a driveshaft, it provides greater stability in unstable terrain. You can purchase a U-bolt kit to secure the pinion carrier to the drive shaft. U-bolts also come with lock washers and nuts. Performance cars and off-road vehicles often use this type of attachment. But before you install it, you have to make sure the yoke is machined to accept it.
End yokes can be made of aluminum or steel and are designed to provide strength. It also offers special bolt styles for various applications. CZPT’s drivetrain is also stocked with a full line of automotive flange yokes. The company also produces custom flanged yokes for many popular brands. Since the company has a comprehensive line of replacement flange yokes, it can help you transform your drivetrain from non-serviceable to serviceable.

bushing

The first step in repairing or replacing an automotive driveshaft is to replace worn or damaged bushings. These bushings are located inside the drive shaft to provide a smooth, safe ride. The shaft rotates in a rubber sleeve. If a bushing needs to be replaced, you should first check the manual for recommendations. Some of these components may also need to be replaced, such as the clutch or swingarm.