Item Description
Features:
Boost the beginning capacity of electric powered motor, safeguard motor towards overloading, damp shock, load fluctuation and torsional vibration, and equilibrium and load distribution in circumstance of multimotor drives.
Apps:
Belt conveyers, csraper conveyers, and conveyers of all types Bucket elevators, ball mills, hoisters, crushers, excavators, mixers, straighteners, cranes, and many others.
|
Product no. |
600 (r/min) |
750 (r/min) |
one thousand (r/min) |
1500 (r/min) |
3000 (r/min) |
Lquid(L) |
Bodyweight(KG) |
|
YOX-a hundred ninety |
 |
 |
 |
.6-1.one |
four.5-9. |
.4-.eight |
eight. |
|
YOX-200 |
 |
 |
 |
.75-1.5 |
five.5-eleven |
.5-1. |
9.5 |
|
YOX-220 |
 |
 |
.4-.eight |
1.1-2.2 |
10-18.five |
.8-1.six |
fourteen |
|
YOX-250 |
 |
 |
.7-1.five |
two.5-5. |
fifteen-thirty |
one.1-2.2 |
fifteen |
|
YOX-280 |
 |
 |
1.5-3. |
four.-7.five |
37-sixty |
one.5-3. |
18 |
|
YOX-320 |
 |
1.1-2.2 |
2.7-5. |
seven.5-15 |
forty five- |
two.5-5. |
28 |
|
YOX-340 |
 |
1.6-3. |
three.-7. |
eleven-22 |
45-80 |
three.-6. |
thirty |
|
YOX-360 |
 |
2.-3.eight |
4.5-9. |
fifteen-thirty |
fifty-one hundred |
three.5-7. |
forty six |
|
YOX-four hundred |
 |
three.-6. |
7.5-15 |
22-45 |
80-one hundred forty five |
four.6-9. |
65 |
|
YOX-420 |
 |
3.5-7 |
11-18.five |
37-sixty |
 |
six.5-12 |
66 |
|
YOX-450 |
 |
6.1-11 |
14-28 |
forty-75 |
 |
six.5-thirteen |
70 |
|
YOX-500 |
 |
10-19 |
26-fifty |
seventy five-132 |
 |
10-19 |
133 |
|
YOX-560 |
 |
19-30 |
45-90 |
132-250 |
 |
fourteen-27 |
158 |
|
YOX-600 |
twelve-24 |
twenty five-50 |
60-one hundred twenty |
two hundred-375 |
 |
24-40 |
one hundred seventy |
|
YOX-650 |
23-forty five |
40-eighty |
90-185 |
280-five hundred |
 |
twenty five-46 |
210 |
|
YOX-710 |
thirty-60 |
60-a hundred and fifteen |
one hundred fifty-280 |
 |
 |
37-60 |
310 |
|
YOX-750 |
forty-80 |
eighty-160 |
two hundred-360 |
 |
 |
40-80 |
348 |
|
YOX-800 |
45-90 |
a hundred and ten-220 |
280-500 |
 |
 |
50-95 |
420 |
|
YOX-1000 |
140-280 |
270-550 |
 |
 |
 |
70-one hundred forty |
510 |
Selection: With no unique requirements the following technical data sheet and power chart are used to decide on the appropriate dimensions of fluid coupling with oil medium in accordance to the energy transmitted and the velocity of motor,e,i,the input of the fluid coupling.
When buying,remember to specify the dimensions of the shaft finishes of lmotor and driven equipment (or reducer)such as
diamenter,tolerance or match of the shafts(if no tolerance or suit is specified,the bores will be machined th H7),fit length of the shafts,width and depth of the keys (of recognize the regular No.enforced).For ordering the fluid
couplings with belt pulley,brake puley or othe unique specifications you should condition the technical knowledge in element.
YOXz is a coincidence equipment with shifting wheel which is in the output stage of the coincidence device and is connected with elastic axle connecting equipment (plum blossom variety elastic axle connecting machine or elastic pillar axle-connecting device or even the axle-connecting machine selected by customers). Generally there are 3 relationship types.
YOXz is interior wheel driver which has limited construction and the smallest axle measurement.The fittings of YOXz have a extensive utilization, basic structure and the dimensions of it has basically be unified in the trade.The link style of YOXz is that the axle measurement of it is longer but it is unnecessary to move the electromotive machine and decelerating device.
Only demolish the weak pillar and linked spiral bolt can unload the coincidence device so it is intense practical. Consumer should supply the measurement of electromotive equipment axle (d1 L1) and decelerating device axle (d2 L2). The wheel dimensions (Dz Lz C) in the desk is just for reference, the genuine size is made the decision by buyers.
Related Products
Organization Details
At any time-Electricity Group Specialist IN Generating ALL Varieties OF MECHANICAL TRANSMISSION AND HYDRAULIC TRANSMISSION LIKE: PLANETARY GEARBOXES, WORM REDUCERS, IN-LINE HELICAL Gear Velocity REDUCERS, ARALLEL SHAFT HELICAL Gear REDUCERS, HELICAL BEVEL REDUCERS, HELICAL WORM Gear REDUCERS, AGRICULTURAL GEARBOXES, TRACTOR GEARBOXES, Car GEARBOXES, PTO Push SHAFTS, Unique REDUCER & Associated Gear Factors AND OTHER Associated Items, SPROCKETS, HYDRAULIC Method, VACUUM PUMPS, FLUID COUPLING, Equipment RACKS, CHAINS, TIMING PULLEYS, UDL Speed VARIATORS, V PULLEYS, HYDRAULIC CYLINDER, Equipment PUMPS, SCREW AIR COMPRESSORS, SHAFT COLLARS Reduced BACKLASH WORM REDUCERS AND SO ON. In addition, WE CAN Generate Custom-made VARIATORS, GEARED MOTORS, Electric powered MOTORS AND OTHER HYDRAULIC Merchandise In accordance TO CUSTOMERS’ DRAWINGS.
Â
Certifications
Â
Â
FAQ
Q: Are you buying and selling business or company ?
A: Our group is composed in 3 factories and 2 overseas income companies.
Q: Do you offer samples ? is it free or additional ?
A: Indeed, we could offer the sample for free of charge demand but do not shell out the expense of freight.
Q: How long is your shipping and delivery time ? What is your phrases of payment ?
A: Generally it is forty-forty five days. The time may possibly fluctuate depending on the solution and the amount of customization. For standard items, the payment is: thirty% T/T in advance ,harmony prior to shippment.
Q: What is the exact MOQ or value for your merchandise ?
A: As an OEM firm, we can supply and adapt our products to a broad selection of demands.Thus, MOQ and cost might significantly fluctuate with dimension, content and even more requirements For occasion, pricey products or common goods will normally have a lower MOQ. Make sure you make contact with us with all appropriate particulars to get the most correct quotation.
If you have another concern, remember to come to feel totally free to speak to us.
Product packaging
Â
Why Choose Us
Also I would like to consider this opportunity to give a brief introduction of our Ever-Power firm:
Our company is a renowned company of agriculture gearbox,worm reduce gearbox, PTO shafts, Sprockets ,rollar chains, bevel equipment, pulleys and racks in china.
We have exported many goods to our consumers all over the world, we have lengthy-time knowledge and sturdy technological innovation support.
Some of our buyer :
Italy: GB GEABOX, SATI, CHIARAVALLI, AMA, Brevini
Germany: SILOKING ,GKN ,KTS
France: Itfran, Sedies, Kuhn
Brazil: AEMCO ,STU
United states: John Deere , BLOUNT, Weasler, Agco, Omni Equipment, WOODS
Canada: JAY-LOR , CANIMEX ,RingBall
……
-> Our Organization with above 12 year’s history and one thousand employees and 20 sales.
-> With in excess of a hundred Million USD product sales in 2017
-> With progress machinery equipments
-> With massive perform capability and substantial good quality management, ISO licensed.
……
you also can check our web site to know for much more specifics, if you need to have our goods catalogue, remember to speak to with us.
Contact us
Â
Â
Â
|
US $29-99 / Piece | |
10 Pieces (Min. Order) |
###
| Standard Or Nonstandard: | Standard |
|---|---|
| Structure: | Flexible |
| Material: | Stainless Steel |
| Trademark: | EPT |
| Origin: | Zhejiang, China |
###
| Samples: |
US$ 999/Piece
1 Piece(Min.Order) |
|---|
###
|
Item no.
|
600 (r/min)
|
750 (r/min)
|
1000 (r/min)
|
1500 (r/min)
|
3000 (r/min)
|
Lquid(L)
|
Weight(KG)
|
|
YOX-190
|
|
|
|
0.6-1.1
|
4.5-9.0
|
0.4-0.8
|
8.0
|
|
YOX-200
|
|
|
|
0.75-1.5
|
5.5-11
|
0.5-1.0
|
9.5
|
|
YOX-220
|
|
|
0.4-0.8
|
1.1-2.2
|
10-18.5
|
0.8-1.6
|
14
|
|
YOX-250
|
|
|
0.7-1.5
|
2.5-5.0
|
15-30
|
1.1-2.2
|
15
|
|
YOX-280
|
|
|
1.5-3.0
|
4.0-7.5
|
37-60
|
1.5-3.0
|
18
|
|
YOX-320
|
|
1.1-2.2
|
2.7-5.0
|
7.5-15
|
45-0
|
2.5-5.0
|
28
|
|
YOX-340
|
|
1.6-3.0
|
3.0-7.0
|
11-22
|
45-80
|
3.0-6.0
|
30
|
|
YOX-360
|
|
2.0-3.8
|
4.5-9.0
|
15-30
|
50-100
|
3.5-7.0
|
46
|
|
YOX-400
|
|
3.0-6.0
|
7.5-15
|
22-45
|
80-145
|
4.6-9.0
|
65
|
|
YOX-420
|
|
3.5-7
|
11-18.5
|
37-60
|
|
6.5-12
|
66
|
|
YOX-450
|
|
6.1-11
|
14-28
|
40-75
|
|
6.5-13
|
70
|
|
YOX-500
|
|
10-19
|
26-50
|
75-132
|
|
10-19
|
133
|
|
YOX-560
|
|
19-30
|
45-90
|
132-250
|
|
14-27
|
158
|
|
YOX-600
|
12-24
|
25-50
|
60-120
|
200-375
|
|
24-40
|
170
|
|
YOX-650
|
23-45
|
40-80
|
90-185
|
280-500
|
|
25-46
|
210
|
|
YOX-710
|
30-60
|
60-115
|
150-280
|
|
|
37-60
|
310
|
|
YOX-750
|
40-80
|
80-160
|
200-360
|
|
|
40-80
|
348
|
|
YOX-800
|
45-90
|
110-220
|
280-500
|
|
|
50-95
|
420
|
|
YOX-1000
|
140-280
|
270-550
|
|
|
|
70-140
|
510
|
|
US $29-99 / Piece | |
10 Pieces (Min. Order) |
###
| Standard Or Nonstandard: | Standard |
|---|---|
| Structure: | Flexible |
| Material: | Stainless Steel |
| Trademark: | EPT |
| Origin: | Zhejiang, China |
###
| Samples: |
US$ 999/Piece
1 Piece(Min.Order) |
|---|
###
|
Item no.
|
600 (r/min)
|
750 (r/min)
|
1000 (r/min)
|
1500 (r/min)
|
3000 (r/min)
|
Lquid(L)
|
Weight(KG)
|
|
YOX-190
|
|
|
|
0.6-1.1
|
4.5-9.0
|
0.4-0.8
|
8.0
|
|
YOX-200
|
|
|
|
0.75-1.5
|
5.5-11
|
0.5-1.0
|
9.5
|
|
YOX-220
|
|
|
0.4-0.8
|
1.1-2.2
|
10-18.5
|
0.8-1.6
|
14
|
|
YOX-250
|
|
|
0.7-1.5
|
2.5-5.0
|
15-30
|
1.1-2.2
|
15
|
|
YOX-280
|
|
|
1.5-3.0
|
4.0-7.5
|
37-60
|
1.5-3.0
|
18
|
|
YOX-320
|
|
1.1-2.2
|
2.7-5.0
|
7.5-15
|
45-0
|
2.5-5.0
|
28
|
|
YOX-340
|
|
1.6-3.0
|
3.0-7.0
|
11-22
|
45-80
|
3.0-6.0
|
30
|
|
YOX-360
|
|
2.0-3.8
|
4.5-9.0
|
15-30
|
50-100
|
3.5-7.0
|
46
|
|
YOX-400
|
|
3.0-6.0
|
7.5-15
|
22-45
|
80-145
|
4.6-9.0
|
65
|
|
YOX-420
|
|
3.5-7
|
11-18.5
|
37-60
|
|
6.5-12
|
66
|
|
YOX-450
|
|
6.1-11
|
14-28
|
40-75
|
|
6.5-13
|
70
|
|
YOX-500
|
|
10-19
|
26-50
|
75-132
|
|
10-19
|
133
|
|
YOX-560
|
|
19-30
|
45-90
|
132-250
|
|
14-27
|
158
|
|
YOX-600
|
12-24
|
25-50
|
60-120
|
200-375
|
|
24-40
|
170
|
|
YOX-650
|
23-45
|
40-80
|
90-185
|
280-500
|
|
25-46
|
210
|
|
YOX-710
|
30-60
|
60-115
|
150-280
|
|
|
37-60
|
310
|
|
YOX-750
|
40-80
|
80-160
|
200-360
|
|
|
40-80
|
348
|
|
YOX-800
|
45-90
|
110-220
|
280-500
|
|
|
50-95
|
420
|
|
YOX-1000
|
140-280
|
270-550
|
|
|
|
70-140
|
510
|
Choosing a Shaft Collar
The shaft collar is a simple machine component used in a variety of power transmission applications. They are most often found on gearboxes and motors. Their simple design makes them an easy component to install and remove. Among other uses, shaft collars are used as bearing faces, mechanical stops, and locating components.
Clamp-style shaft collars
Clamp-style shaft collars fix many of the problems associated with set-screw collars. Available in two-piece and one-piece designs, these collars compress the shaft and lock into place. This allows for a uniform distribution of force on the shaft. Clamp-style shaft collars provide more holding power than set-screw collars, but they work best under consistent pressure. Clamp-style shaft collars also work better against negative forces, as they have a separate, un-tightened side.
Clamp-style shaft collars feature mounting holes in the outer diameter. Like clamp-style collars, mountable shaft collars can be installed on adjacent assemblies, but the mounting method does not affect holding power. Mountable shaft collars are commonly used in mounting sensor brackets. They may have rounded or flat outer diameters to accommodate the mounting process. Mountable shaft collars may also have tapped or flat holes to facilitate installation.
Quick-clamp shaft collars have the same functionality as clamp-style collars, but feature a removable lever. They are typically quick-to-install and do not mar the shaft. Quick-clamping collars are especially beneficial in applications that require light-duty torque. They also make for quick and easy adjustments.
Heavy-duty shaft collars feature larger outer diameters, a wider face, and a larger screw. These collars are ideally suited for d-shafting and can offer greater holding power than set-screw collars. These collars are typically manufactured from high-strength 2024 aluminum.
Clamp-style shaft collars can be used in many different applications. They can be used for a variety of applications, including bearings, and are especially suited for rotary machines. However, there are some drawbacks. While they may not be as flexible as set-screw collars, they can still perform well under constant loads. One drawback is that they tend to loosen under shocks and reduce the holding power of clamping hardware.
Another advantage of clamp-style shaft collars is that they do not mar the shaft and allow for easy positioning adjustments. Furthermore, they are easier to install and offer greater holding power than set-screw collars. These collars are made from high-quality materials with tight tolerances and are available in different bore sizes.
Clamp-style shaft collars are the most common type of shaft collars. They can be two-piece or one-piece. Among these, two-piece collars are the most convenient option. One-piece collars are hard to move, and two-piece collars have a hinge on one side and a clamp-style collar on the other side.
The materials used in Clamp-style shaft collars play a crucial role in their overall performance. They should be strong, corrosion-resistant, and have good holding power. They should also be able to withstand high temperatures. The most common materials used for shaft collars are steel and aluminum. Some types are made from stainless steel, while others are made from engineered plastic.
Clamp-style shaft collars can come in two pieces or single-piece designs. The smaller one-piece collars usually have a back-cut opposite the clamp cut, which reduces the cross-sectional area at the hinge point. This reduces the amount of force required to clamp the collar, which makes it easier to use stronger screws.
Aluminum, carbon steel, and stainless steel shaft collars
When choosing a shaft collar, you should consider the material it is made of. You can purchase collars made of carbon steel, aluminum, or stainless steel. Each of these materials has its benefits and disadvantages. Steel is more durable than aluminum and tends to provide better holding power. Aluminum, on the other hand, is lighter and has a favorable strength-to-weight ratio. The material you choose should depend on your specific needs, such as corrosion resistance or weight.
Mountable shaft collars are used to mount sensors, fixtures, and other assemblies. These collars are available with outer diameter holes, flats, or quick-release designs. The material used to make these collars varies, with standard models made of 1215 lead-free steel and 2024 aluminum.
When choosing shaft collars, take into account the material and surface treatment. Different materials offer different properties, which will determine the performance of the collar. In addition to material, each shaft collar comes with a different holding power. Holding power is a key factor in choosing a shaft collar because it determines the amount of load it can withstand without slipping. The holding power depends on the screw size, the bore size, and the bulk of the collar.
Aluminum, carbon steel, and stainless steel shaft-collars can come in various styles. CZPT, for example, offers standard shaft collars in hex and d-bore profiles. Hex collars provide extra holding power and are better than set screws. Additionally, they do not mar the shaft and provide a better grip.
Another type of shaft collar is the quick-clamp shaft collar. These features allow users to install and remove them with ease. The quick-clamp collar has a handle that allows the user to quickly adjust it. While these shaft collars are designed for light duty applications, they are not recommended for heavy-duty or high-RPM applications.
Shaft collars are simple yet versatile components. They are used for various applications, including mechanical stops, stroke limiters, and retainers. They can also be used to align and space other components. Shaft collars are widely used in gearbox assemblies, flagpoles, and medical instruments, among others.
Two-piece shaft collars offer the same benefits of one-piece shaft collars, but offer additional convenience and versatility. They are easier to install and disassemble, reducing installation and labor costs. They also offer superior holding power. They also feature a threaded bore that acts as a positive mechanical stop when the shaft is rotated.
Over-torqueing shaft collars
Shaft collars are often used to secure components on shafts or other surfaces. They also provide an easy way to adjust the positioning of motor assembly components. Many different types of shaft collars are available to meet the specific needs of different applications. These include round, hexagonal, square, and D-bore collars.
The design of shaft collars must account for the load they will support. Some collars are made of metals, while others are made of plastic or composite materials. Typically, shaft collars are made of steel, but can also be made from aluminum or alloyed steel. Some are coated with zinc.
Shaft collars are available in one-piece and two-piece designs. Single-piece collars are designed to fit securely around a shaft, while double-piece collars allow for greater clamping force. These collars can be assembled anywhere along the shaft and can be installed between two pieces. They are available in different bore configurations and can be customized to meet your specific application.
Clamp style collars are easy to install and disassemble, and have a larger holding force than one-piece collars. These collars are also more shock-load resistant. They also don’t mar shaft surfaces, unlike setscrews. They can also be easily adjusted without damaging the shaft. Another style of collar is the quick-clamping style. This type of collar doesn’t mar the shaft, and is easily installed and removed without tools. These are best for light-duty applications.
When choosing a shaft collar, you should consider the tolerance of the shaft. It is important to select a shaft with a tight tolerance. The shaft’s hardness should not be greater than Rockwell C35. A wide tolerance will affect the holding power of the collar. If the shaft is undersized, you may need to use a screwdrive to slide the collar on the shaft.
Shaft collars are a versatile component with many different applications. They can secure industrial railings or serve as positioning devices in medical equipment. They are also widely used in automation machinery. They are used to protect cylinders and actuators and to ensure alignment between components. For this reason, they are very versatile and adaptable.
Clamp-style collars work well under constant loads, but they may need assistance during impact loads. Shock loads can be difficult to avoid, especially if the mass is small. Clamp-style collars with an undercut in the shaft help to resist the impact of shock. Moreover, they offer positive stops in both axial directions.
Clamp-style shaft collars are a good alternative for set-screw collars. They are easy to install and prevent shaft damage. They also come with an added advantage of being easy to adjust. Clamp-style shaft collars have double the holding power of set-screw collars.
In addition to holding components, shaft collars can also function as spacers and limit shaft movement. They are essential for many applications. They are commonly used in motors and gearboxes to ensure correct positioning for power transmission. They are also used to control shaft movement in reciprocating applications.
editor by czh 2023-01-25