Deep groove ball Deep Groove Ball Bearing bearings will be the hottest bearing type. Therefore, they are available from LYHY in lots of models, variants, series and sizes. Deep groove ball bearings happen to be versatile, self-retaining bearings with sturdy outer rings, inner bands and ball and cage assemblies. These sort of bearings are of straightforward design, durable in procedure and easy to maintain; They are available in single and dual row models and in open up and sealed variants.
In a deep-groove ball bearing, the race dimensions are near the dimensions of the balls that work in it. Deep-groove ball bearings can support bigger loads. As a result of development technology used, start bearings can nonetheless have turned recesses on the external ring for seals or shields. Due to their low frictional torque, they will be suited to high speeds.
Packing:
1. Bearing surface is covered with the anti-rust oil first; After that covered with the plastic-type material film;
2. Then packed the roller bearings with draft papered specialist belts;
3. Finally, packing the bearings with wood box totally at the outer packing to invoid the rust or the moist;
4. We can as well packing the bearings relating to consumers’ special requirement;
Feather
High quality steel: Ultra clean steel to extend bearing life by up to 80%
Advanced grease technology: LYHY lubricants that can extend grease life and performance.
High Grade Balls: Quiet and smooth operation even at high speed
Super finished raceways: Specially honed to reduce noise and boosts lubricant distribution and existence.
Paten seals: Provide resistance to contamination in the toughest environments
Quality Assured: 100% testing ensures total 
product quality
Our deep groove ball bearings deliver trustworthy performance in an array of applications and conditions. With super-finished raceways and controlled geometries, our premium design helps ensure consistent top quality. Our portfolio contains standard, thin section, narrow, huge and miniature and extra-tiny deep groove ball bearings that span 3 mm to 400 mm bore sizes. The prolonged product line carries a complete providing of wide open, shields, seals and snap ring combinations.
Its chrome steel engineering makes it durable and resistant to deformity under heavy loads. The rubber seals on both sides of the bearing retain lubricant in and contaminants out. This single-row sealed ball bearing is usually for use in applications that involve mixed radial and axial loads and a need for high running reliability at substantial rotational speeds. These kinds of applications incorporate clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile equipment, among others.