Worm Gear Velocity Reducers: Double Reduction
Ever-Power. manufacturers double reduction Worm Gear reducers that are built to last. Double lowering units are created with the same top quality elements as the single reduction Worm Gear reducers.
Double Lowering Worm Gear Speed Reducer Features
Cost effective
High Reduction: 75:1 – 3600:1 and higher
C-face input or solid shaft input
Combination of two single reduction reducers
Solid or hollow output shafts available
Several varieties of bolt-on bases available
High tensile strength cast bronze worm wheel and a hardened and surface alloy steel worm made integral with the shaft for extended and trouble-free life
All cast iron construction
9 Versions: I, IC, IS, ICS, IM, IMS, ISF, ICSF, IMSF
Double Reduction Worm Gear Acceleration Reducer Applications
Conveyors
Packaging Machinery
Cranes/ Hoists/Winches
Mixers/ Agitators
Shipping & Delivery
JIT delivery
Standard shipping: 3-4 days
Same/next day shipping on stock products at no additional
cost
Dual reduction gearing mechanism can be used in large machinery and automotives where in the speed needs to be reduced at a essential level. For eg if the insight speed is certainly 2000rpm and the output quickness desired is usually 300rpm a reduction gearing device is used such as a reduction gear field. However in case of dual reduction mechanism, the reduction of speed takes place in 2 steps. Initially the suggestions from the engine shaft has a pinion mounted onto it through couplings. This pinion gear is then linked to an intermediate equipment which is first lowering gear. This gear is then connected to another low rate pinion on another shaft. This low swiftness pinion is linked to the next reduction gear which is mounted on the propeller shaft which may be the output.
Greaves Double Reduction Quickness Reducers are two stage worm reduction products. A specially designed primary worm lowering unit is integrally attached on a standard single decrease Greaves worm reducer which varieties the next stage. The composite devices provide the most compact and rigid arrangement for large reduction of speed necessary for gradual moving machinery. A wide range of ratios upto 4900:1 is available.
The wormshafts are constructed with top quality case hardening steeL accurately generated, ground and superfinished. The wormwheels include phosphor bronze centrifugally cast rims of considerable sections welded to rigid centres. Considerable overall flexibility of shaft layout is usually permissible with all types of Double Reduction units
Ever-Power Double Lowering Worm Gearboxes will be two stage worm reduction units.
A exclusively designed primary worm decrease device is integrally mounted about a standard single lowering AGNEE worm gearbox which forms the second stage. The composite devices provide the most compact and rigid arrangement for large reduced amount of speed necessary for slow moving machinery. A wide selection of ratios up to 4900:1 is available.
Double Decrease Worm Gear Package Sizes double reduction gear reducer Available with us are 40, 50, 60, 75, 85, 100, 125, 150, 175, 200, 250, 300, 350, 430.
Nominal Gear Ratios: 100:1, 150:1, 200:1,300:1, 400:1, 600:1, 750:1, 1000:1, 1200:1, 2000:1, 2800:1
Nominal ratios listed certainly are a typical selection of commonly applied ratios from the overall range of Ever-Power Twice Reduction Worm Gear Box. Information on other ratios available on request.
Under Driven / Over Driven / Vertical Input or Output Shaft Type / Shaft Mounted Version / All types with motor installation adaptor /
motor – optional
The worm shafts are constructed of high quality case 
hardening steel, accurately generated, ground and super finished. The worm wheels include phosphor bronze centrifugally cast rims of substantial sections welded to rigid centers. Considerable overall flexibility of shaft layout is permissible with all types of Double Reduction models.
Product Description
The merchandise are widely applied in the making equipments of all types of industries household and overseas. They are the best options for nowadays modern facilities of mechanical reducing travel control to know large twisting distance, significant gear ratio, low noises, high proficiency and low temperature.
Description:
Customized high quality double worm gear rate reducer aluminium gearbox decrease gearbox with electric motor
Ratio:
7.5,10,15,20,30,40,50,60
Color:
Blue, Silver Or because customer’s requirements
Noise:
low noise (<50DB)
Advantage:
Substantial Efficience and low noise and low temperature
Material:
Housing: Die-Cast Aluminum Alloy
Worm Gear-Bronze 9-4#
Worm-20CrMnTi with carburizing and quenching, surface area harness is 56-62HRC
Shaft-chromium steel-45#
Packing:
Carton and Wooden Case
Bearing:
C&U Bearing
Seal:
NAK SKF
Warranty:
One Year
Input Power:
0.06kw, 0.09kw, 0.12kw, 0.18kw, 0.25kw, 0.37kw, 0.55kw, 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw
Usages:
Industrial Machine: Food Products, Ceramics, Chemical substance, Packing, Dyeing,
Wood working, Glass.
IEC Flange:
56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5
Lubricant:
Synthetic & Mineral
