A chain and sprocket drive is a kind of power transmission in which a roller chain engages with two or more toothed wheels or sprockets, found in motors as a drivefrom crankshaft to camshaft.
Ever-power is proud to inventory a wide collection of Sprockets along with this huge variety of agriculture, gardening, preparing food and outdoor goods. We stand behind all 26,000 products we sell with this Satisfaction Guarantee. Customer Service is the cornerstone of our family business, and has been for over 50 years.
Application
Ever-power drive sprockets provide tough, reliable service and feature replaceable tooth plates for convenient field maintenance. Tooth plates for 102 and 142 series chain can be found with a segmental/symmetrical reversible tooth profile. The 142 DBL, TPL plus the 175 and 260 series use our nonsymmetrical profile.
Travel sprockets weren’t always made to be bolted upon. At one time they were welded onto the final drive motor and had to be slice off if they were replaced. Finally, welded-on adapters were mounted that allowed the sprocket to become bolted on, and more modern designs use the bolted approach altogether.
When someone sends in your final drive motor for all of us to take a look at or?rebuild/reman, we advise them to remove the sprocket. We don’t need the sprocket in place to evaluate the engine and the added pounds (that can be significant) unnecessarily increases your shipping costs.
Signs of Sprocket Wear
The teeth on a drive sprocket are where you look for wear . They should be tall and toned towards the end, not sharpened or dished by the end. And the sprocket, and even more specifically its teeth, commence to wear, its size becomes smaller. This causes what is referred to as a pitch mismatch, where the pearly whites on the sprocket no more interact with the track links as effectively. This may accelerate the put on of the sprocket and reduce the efficiency of your apparatus.
If your sprocket shows sign of excessive wear, then its time to replace it before it starts to cause abnormal track wear or starts to negatively affect the performance of your final drive motor.
Preventing Sprocket Wear
One of the key methods to prevent accelerated sprocket have on is to check the track pressure. If the strain is too tight, it will cause don on the sprocket teeth. We’ve talked before about the value of keeping the undercarriage clean, and the health of the undercarriage can affect the track tension (especially if there is a build-up of dried mud and debris). That’s section of the factor we put so much focus on keeping the undercarriage clean
Conclusion
With out a functioning drive sprocket, your track drive won’t have the ability to propel your equipment. Fortunately, there are methods to help your drive sprocket go longer: keep carefully the track stress at an effective level and hold your undercarriage clean.
DRIVE SPROCKET
The undercarriage of your track machine ought to be inspected regularly. 
If you find early wear or harm to your tracks, a donned sprocket could be the cause.
15 cogs / teeth
16.77 inches in diameter
12 equally spaced bolt holes
Fits the next Bobcat Compact Track Loaders: T180, T190, T550, T590
Parts can vary based on your serial number.
All Ever-electric power sprocket tooth profiles are induction hardened to 55 Rockwell C., and are replaceable. The alternative and maintenance of tooth plate segments will not require removal of the travel shaft, bearings, etc. Ever-power also designs customized split hub pieces for retrofit applications that minimize field labor costs.
At 1st glance, you might think that if you’ve seen one drive sprocket, you’ve seen all of them. However, Ever-power possesses added an I.D. lip and spiral band that captivate the needle bearing along with an external snap ring that raises performance and dependability. While easy to overlook, it’s this attention to details that the racer features come to expect from Ever-power.
An I.D. lip and spiral ring that captivate the needle bearing
Exterior snap ring caps sprocket upon drum & increases durability
CNC-machined teeth include a corrosion-resistant finish
Specifics:
Chain Type: #219
Tooth Configuration: Standard
