Fan Engine, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, removed from unused 18” or 24” China Atmosphere Compressor diameter TPI fans. Made to run an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring between your electric motor, capacitor and quickness control switch is still installed nevertheless the cord itself is generally detached as observed in the photos. (Discover “Control Notice” below for alter type.)
T (See “Application Notice” below for make use of in various other applications.)
Dimensions: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is certainly½” (0.500″) diameter x 2 ½” lengthy with a collection screw clean. There are (4) threaded mounting lugs on the front of the motor, ½” long x .16 dia. with washers and nuts. The studs appear to have got 4mm threads and to become on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to the next).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electric powered motor) is Clockwise.
Control Take note: Motors will come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH variations in the electric fan motor china images). These two types of switches both control the engine just as (but you have a rotating knob and you possess a pull-chain). If you order several motor at a time, we will do our best to supply your purchase with each one kind of control or the excess.
Application Note: USUALLY DO NOT use this electric engine in a nonfan program. This is a totally enclosed fan electric engine and designed to have continuous ventilation over the electric motor casing for cooling. The housing isn’t vented and 
the electric engine will overheat and enter automatic thermal overload if operate in a nonfan plan where there isn’t solid ventilation past the electric motor. (Caution Note: the electric motor will restart immediately when it cools cool off.) Using this electric motor for applications aside from 18 & 24″ TPI fans could also overload the motor and cause it to proceed into automated thermal overload. (Your lover blade from another manufacturer may possess a steeper blade position.)
Origin: This electric engine is manufactured in China.