Request Custom or
In-Line Gearboxes | Inline Planetary Gearbox
Click image to enlarge
Ever-Power offers regular and customized in-collection gearboxes to meet the needs of almost any motion or power transfer program. Our inline gearboxes are designed for low backlash functionality. They are precision built to provide reliable service in even the many demanding operations.
Read “10 Facts to consider to obtain the Gearbox YOU WILL NEED” for assistance to find the best and most effective equipment reducer option for the application. “Inertia and the usage of Inertia Figures” has an example and a formula for dealing with inertia in gearbox selection.
Custom Inline Gearbox Solutions
All the inline gear drive models below can be customized to fit your performance and application requirements. Demand a quote on a custom gearbox or get in touch with Ever-Power to go over your unique needs.
High Speed In-Range Spur Gear Box
POWERFUL, Low Backlash Rate Reducer Gearbox
Encoder, Low Backlash
In-Line Low Backlash Taper
In-Line Low Backlash Taper
Servo Gearbox | Planetary Gearbox | Servo Gear Reducer
Epicyclic Servo / Planetary
Inline Planetary Gear Reducer Options
Gearboxes are known by many different titles, including equipment drives, reducers, gear reducers, swiftness reducers, and gearmotors. All terms can be used pretty much interchangeably when refering to inline planetary equipment reducers.
Spur In-Line Gearboxes
Ever-Power offers a full line of compact, light-weight spur gear inline planetary gear reducers. These inline gearboxes can be direct installed to motors or used with shaft coupling. Ratios from 2:1 to 625:1 can be found, with torque values which range from 0.13Nm to 90Nm.
Input rate: up to 4,000 RPM
Precision machined aluminum housing
Dual ball bearings upon all shafts
Encoder Low Backlash In-Line Gearboxes
These compact, light-weight, low backlash gear drives are designed particularly for encoder applications. They have a very low second of inertia at the shaft input, and so are rated for insight boosts to 3,000 RPM. Gear ratios from 4.96:1 to 3600:1 are available, in two frame sizes. Synchro cleats for our encoder gearboxes can be found from stock.
Result torque: 1 oz.-inch
Backlash: 15 arc-minutes (in any ratio)
Ratios from 4.96:1 to 3600:1
Input boosts to 3,000 RPM
Diameter: 1-1/16” or 1-3/4”
Black anodized aluminum housing
303 stainless steel gears and shafts
Low Backlash Inline Taper Gearboxes
Our taper gearmotors are inline planetary gear reducer boxes with backlash equal to or better than 8 arc/minute. These inline gearboxes are created for applications where space is bound, and are available either as a shaft input or installed to a 24V DC motor.
Low backlash: ≤8 arc/min. at input
Shaft input or with mounted motor
Ratios from 2:1 to 16:1
Output torque values from 1.14Nm to 12.7Nm
Epicyclic (Planetary) Servo Gearboxes
The Ever-Power line of internal epicyclic servo reducers are extremely rugged and compact. These planetary gearboxes have fully-machined housings (aluminum or steel), and so are outfitted with ball bearings throughout. Our inline planetary gear reducers offer flexible electric motor mounting options and may deliver output torques up to 380 Nm. Ratios from 3:1 to 36:1 are available.
Low backlash: ≤30 arc/min. at input
Input speeds since high as 3,000 RPM
Precision machined aluminum housings
Dual ball bearings on all shafts
Available in ratios from 3:1 to 36:1
Output torques because high as 380Nm
Speed Increaser Gearboxes
Our low ratio Encoder gearboxes and inline taper gearboxes may also be used as gear acceleration increasers, if needed.
The Ever-Power Advantage: 30 years of Unparalleled Quality
Greased for life
Input speeds as high as 4,000 RPM
Available with gear ratios up to 3600:1
Customized gearboxes available
Completely machined from block housings
Ball bearings upon all shafts
Ever-Power offers a wide selection of misalignment shaft couplings in ” and metric bore sizes. In . and metric Precision Surface Shafts are available from stock.
Contact Us for POWERFUL Inline Gear Drives
Request a quote on a customized inline gearbox for your application. Contact Ever-Power to go over your custom requirements.
Right angle gearboxes (worm and planetary) are tough and built for 90° turns. Inline reducers (parallel shaft and planetary) are a perfect match for motors with high insight speeds, or when gearmotor performance is important. Get in touch with our technical sales personnel for help determining which gearbox option is most beneficial for you.