As mentioned above, before employing any attachments or perhaps implements, always browse, understand and follow the manufacturer’s safety manual.
Only use equipment that is in good repair. Make sure that all guards or shields happen to be set up and operational.
Guards around the power take-off shafts, gear container and other rotating/spinning apparatus are very important.
Lower hydraulics.
Shut down the tractor engine.
Apply tractor parking brake.
Hitch tractor to implement.
Make sure that universal joints will be in the correct stage when connecting the shaft.
Usually do not wear loose garments. Tie back long frizzy hair. Do not wear shoe laces dangling.
Stand away from moving or rotating products. Where possible, work from the tractor seat, and have bystanders be at least 6 metres (20 foot) away.
Do not take out shields from the PTO shaft.
Ensure that the PTO spinner/integral shields rotate freely.
Utilize the correct size drive for the machine being powered.
Match the right PTO rate for the machine being used.
Do not stage over a rotating shaft. Actually PTO shafts with guards will be dangerous. Walk around the gear.
Know how to prevent the tractor, engine and attachment quickly in case of emergency.
Follow shutdown techniques and wait for all moving parts to stop before moving away from the tractor or approaching the attachment.
Disconnect PTO you should definitely in use.

“Power Take Off” (PTO) is a term used to spell it out the procedure of transmitting power in one indicate another.A PTO shaft, for instance, is a cylindrical metallic rod that attaches to a power Power Take Off Shaft source, such as a tractor, at one end and an attachment, for instance a brush hog mower, at the various other. When the tractor’s engine is normally running, ability flows along the shaft. The shaft rotates at engine acceleration, transferring strength from the engine to the attachment.
When attaching or detaching PTO-driven equipment:

PTO originated mainly through the ingenuity of farmers. During the past, power take-off applied belt drives, travel shaft attachments and pneumatics like bleed air flow, but a geared transmission is more prevalent today.
Power Take-Off accidents are very common on a farm. According to the National Agricultural Safety Data source, most PTO accidents occur when apparel and/or limbs will be entangled in the rotating PTO shaft.