Worm drive worm motor Gearbox with motor
A robust worm-drive gearbox powered by an MM28 electric motor. Ideal applications where an easy to fit, high torque output is required. Ideal for student based projects including robots and buggies.
The unit has been designed to ensure that the output shaft can be ‘clicked’ in and out for modification. E.g. reducing to size. The electric motor is snap installed into its cradle to engage the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + motor: 35(W) x 40(H) x 60(L)mm
The primary feature of the high-efficiency gear box is a worm gear, which locks the output shaft whenever the engine isn’t turning. The high equipment ratios of 216:1 or 336:1 get this to gearbox appropriate for little walking robots, lifting mechanisms, and various other applications where high torque is definitely desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draw up to some amps, making them perfect candidates for the DRV8833 motor driver carrier. Electric motor overheating can be caused by excessive stalling, actually at very low voltages. We recommend that you utilize stall-detection sensors, or just watch your robot, to make sure that it doesn’t stall for lots of seconds at the same time.
This gearbox includes a 4 mm diameter, round output shaft, which works together with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also fits on the smaller threaded end of the shaft, though it is not particularly intended to work with this type of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right position worm geared motors arranged new specifications for reliability, performance and economy with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly style offers easy integration at this point and a future proof option. The Ever-Power gear motor offers total flexibility in mounting choices includes shaft, base, encounter, and flange solutions. The engine terminal box can be mounted in option positions rotated in 90º steps around the motor frame providing for unparalleled integration possibilities.
Ever-Power gear motors comply with UNITED STATES and International standards, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a genuine total alternative for our global customers.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose proof,and can be utilized outside or in wet and dusty conditions without the utilization of additional enclosures. Full rated output is available at the result shaft of the unit.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Additional features:
Connecting with Plug connectors.
With integrated inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the answer for applications requiring a part turn, optional dual output, or an inability for the electric motor to be back driven. The DC correct angle gear motors are designed for continuous and intermittent duty procedure. Our right angle gear reducers were created with several mounting plate choices, making them perfect for a number of DC electric motor based applications. We offer 12 ratios ranging from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ hours (varies by application)
EP Products Worm Equipment Motors are created to generate high torque in a small package size. Worm Gear Motors are excellent for applications that want a self- locking or breaking feature because the result shaft can’t rotate when there’s no power used. Additionally, Worm Gearheads can transfer movement in 90 degrees. With various reduction ratios, precision cut gears, voltages and sizes, EP Items includes a DC Worm Equipment Motor solution for the application.
Features and Benefits
Very High Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Gear Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Protection Door Locks / Industrial Conveying Systems / Security Gates / Dental Chairs / Ambulance Cots & Stretchers Many of our DC Motors could be complimented with among our Worm Gearheads. EP Products will continue to work with you to design and manufacture a Worm Gear Electric motor that may optimize the overall performance of your unique application.
Built to your specific requirements
Engine Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Cut / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm engine runs on the metal gear box for durability and a high torque output. Because of the special mechanical framework of the worm drive the motor output shaft is definitely self locking and will not be rotated.
This part runs on the two wire connection and supports direction control as well as PWM speed control. Rated voltage is 12v and can accomplish 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Ranked Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear devices from EP DRIVESYSTEMS especially display their power in applications where high equipment ratios are essential. Our worm geared motors are for that reason optimally suited for make use of in intralogistics, packaging technology and the meals & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a high overload capacity
Maintenance Friendly
Washdown versions allow simple and effective cleaning of the drive program.
Corrosion protection
The NSD tupH sealed surface conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Flexibility
Our modular design give users optimum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are many applications that want drive systems, and each of these has its own unique requirements. The EP series worm gear motors could be quickly and effectively adapted to fulfill your needs.
Worm gear products impress with their high power density and small design. If required, we are able to also supply them with the impressive nsd tupH surface area treatment.
As well as the basic EP housing, you can expect an extensive type of bolt-on parts to customize the merchandise including torque arms, shaft covers and output flanges. These could be very easily field installed, but we will also be happy to assemble the average person components for you.
Discover more about the modular SI worm geared motors!
Find out more
Soft and Clean: The EP worm equipment unit SMI
SMI worm gear units feature a simple, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface conversion makes this product ideally suited for severe and demanding industries like food processing and pharmaceuticals.
Versatile input designs such as NEMA, IEC or immediate motor mounts in additional foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared electric motor program. The units possess on all sides different repairing possibilities and enable a simple assembling for the client.
Other drive configurationscan be created by use of built-on accessories (e.g. torque arm and output flanges). The housings are made in light weight building out of aluminium die cast. Electric motor attachment is realised generally by means of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:output shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Buy Worm Drive Gearbox with Motor – incorporating the following features: 1 to 6V voltage ranking, 17100 rpm no load rate, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm wide, 40mm high, a robust worm drive gearbox powered by an MM28 engine (included), most suitable for applications where an easy to match, high torque result is necessary, nylon housing and gear, requires light essential oil or silicon grease lubrication, perfect for student based tasks including robots and buggies.
Most suitable for applications where a simple to match, high torque result is required
Perfect for student based tasks including robots and buggies
Reversible High torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Features:
The electric motor is Gear DC engine with micro-turbine worm, you can change the wiring-connection to change motor rotation.
Turbo worm geared electric motor with self-lock, that is, in the case of motor without electrical, the output axis is fixed, self-lock.
The reducer output shaft arranged vertically with the engine shaft, whole motor output shaft relatively-short than general gear motor, trusted to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the window, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s engine is essential in order to avoid your robot being pushed by your opponent robot. The worm equipment is certainly a better option when compared to spur gear motor. How come worm gear so particular? Check this wiki out: Worm Drive.
“Unlike with ordinary gear trains, the path of transmission (insight shaft vs output shaft) is not reversible when working with large reduction ratios, due to the higher friction involved between your worm and worm-wheel, when usually an individual start (a single spiral) worm can be used. This can be an advantage when it’s desired to get rid of any likelihood of the result driving the input.”
In other phrases, it is hard to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g
