The EP Greenhouse Gearbox is a compact and lightweight reduction gearbox with an integrated limit switch system that’s ideal for assembly of a locally available electric electric motor. The Gearbox is utilized in manually-controlled or climate-controlled ventilation and screen systems in greenhouses. The quick and Gear motors for Greenhouse easy-to-installEP Gearbox is certainly rainproof and windproof. The Gearbox includes a high protection course (IP65) and can be used within an ambient temperature of 0-60 °C.

The low-noise Gearbox for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminium precision housing. The self-braking worm wheel transmission means that the drive shaft can be locked when the decrease gearbox is not running. The completely sealed reduction gearbox has an expansion chamber with a diaphragm to keep carefully the gear oil at a minimal pressure under all conditions, even at high temps. Thanks to the usage of an growth chamber, the Gearbox could be installed in any placement. There are no limitations, since there is no need for a bleed connect. The sealed reduction gearbox keeps the gear oil of the Gearbox in optimal condition for its entire operating life time. The Gearbox is ideal for discontinuous use, operating class s3-30%, with a maximum activation time of 25 minutes.

THE APPARATUS box reduction gearbox comes with an FT85 motor assembly flange, on to which a suitable IEC standard motor can certainly be installed (EN 50347).

The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit switch system is installed in an included chamber and is enclosed by an impact-resistant plastic cover. The limit switch system is accessible and simple to adjust. The limit change system’s optimum switching range is definitely 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The Gearbox comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The Gearbox for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.

Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of software of 4-pole electric motor.
Protection class IP65.
May be used in ambient temps of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, optimum activation time 25 a few minutes.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC regular motor (EN 50347).
Maximum switching range of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).