rotary cutter gearbox

rotary cutter gearbox

rotary cutter gearbox
RC-20 Sequence
Requirements
Torque: 1,750 – 3,267 lb.-in.
198 – 369 Nm.
Ratios: 1:two.five, one:2.eighty three
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: sixteen oz. (.47 L)
Bodyweight: 34 lbs. (fifteen.4 kg)
Applications
Finishing Mowers Rotary Cutters
Rotary Slashers Toppers
RC-27 Series
RC-30 Series
Technical specs
Torque: two,800 – four,667 lb.-in.
316 – 527 Nm.
Ratios: one:one.forty seven, 1:1.71, 1:one.ninety three
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: 23 oz. (.sixty eight L)
Excess weight: 51 lbs. (23.1 kg)
Programs
Finishing Mowers Rotary Cutters
Rotary Slashers Toppers
RC-51 Sequence
Requirements
Torque: two,800 – 4,667 lb.-in.
316 – 527 Nm.
Ratios: one:one.47, one:one.71, one:1.ninety three
Seals: Triple Lip Spring Loaded
Bearings: Tapered Roller/ Deep Groove Ball
Oil Cap: 27 oz. (.eighty L)
Excess weight: fifty six lbs. (25.4 kg)
Programs
Rotary Cutters Rotary Slashers
Gears: Accessible with possibly straight bevel or spiral bevel gearing.
Power: Hp & Torque based mostly on AGMA method for steady responsibility plus a services or load course aspect.
Shafting: Different dimensional, metallurgical, and heat-treat alternatives obtainable.
Bearings: Geardrives accessible with different bearing daily life possibilities.
Lubrication: Drives obtainable with numerous lubes based on running traits

Replacement Rotary Cutter gearbox, 40hp rated, one-three/eight”-six spline enter shaft, 1.fifty seven” X 12 tapered spline output shaft and one:1.forty seven pace up ratio. These gearboxes have a sq. housing configuration and are similar in mounting and ratio to the spherical configuration gearboxes. These are unique products gearboxes on the IM402, IM502 and IM602 collection rotary cutters which showcased slip clutch PTO shafts. This gearbox will not fit the IM400, IM500 and IM60 designs as they have a clean enter shaft! If your gearbox has a twelve spline output shaft and a one-3/8″ – six spline enter shaft this gearbox will perform. Bolt sample is 4-3/4″ on heart gap to gap and six-three/4″ middle to heart of bolt gap on diagonal. The mounting holes type a square bolt sample.

rotary cutter gearbox

This is how rotary cutter gearbox could be used for your advantage.