Equipment Packing containers For Rotary Cutter’s, Shredders, and Choppers
RC thirty Series Gearbox, 40hp Rated, 1-3/8″ SB enter, one-one/2″ X 12 Spline Output. 1:one.47 Ratio Replace your broken rotary cutter gearbox with this alternative unit. Why rebuild when you can change at such a lower cost? These gearboxes have been utilised by Worksaver, HawkLine, Global, WAC, Large Bee, LMC, King Kutter, Midwest, Servis, Bush Hog, some Howse and a lot of much more. Observe: Actual Gearbox could have a rounded housing or square as proven, depending on existing availability, all inner areas are interchangeable and specs for equally bins are similar! This gearbox characteristics a 1:1.forty seven Pace Up equipment ratio for use on 5′ and larger diameter rotary cutters. Industry normal one-3/eight” sleek diameter enter shaft with one/2″ shear bolt gap and retaining ring groove and one.fifty seven” diameter twelve tapered spline output shaft allow fitment to most light, regular and medium responsibility rotary cutters. Each gearbox features higher pace ball bearing models and heat dealt with gears and shafts to ensure long daily life. Four bolt mounting matches business expectations. Every gearbox consists of blade provider mounting nut and cotter pin. Gearboxes are transported dry and need sixteen ounces of 80-90W gearlube or equivalent. Disclaimer: Any and all Unique Products Manufacturer’s (OEM) tradenames, trademarks, drawings, shades, descriptive data and element numbers are utilized for areas identification functions only, and DN Tools, LLC (DN) is in no way implying that any particular areas are OEM elements. Even more, any use of the OEM’s tradenames, emblems, drawings or portion quantities by DN is made only to aid DN’s clients, in getting the suitable DN portion or component which will substitute the OEM’s component.
rotary cutter gearbox