All EPT shaft collars, including quick-clamping collars, are one point faced to ensure perpendicularity and proper alignment. This critical manufacturing step assures precise shaft collar encounter to bore relationship resulting in correct aspect positioning on the shaft and possibly pressure on interfaced components.
Quick-clamping shaft collars from EPT are produced from high quality metal with type-II sulfuric anodized finishes, with a dark-colored finish on the collar and a gold finish upon the clamping lever for added visibility. Aluminum collars are corrosion tolerant, lighter than different metals, possess low inertia and have non-magnetic properties. All EPT products will be RoHS and REACH compliant. Available standard sizes for the quick-clamping shaft collars are 0.375” to 1 1.5” in the in . series and 8 mm to 38 mm in the metric series.
Shaft Collar, System of Measurement In ., Shaft Locking Type – Couplings 1 Piece Speedy Clamp, Bore Type – Collars Ordinary Bore, Bore Dia. 3/8 In., Material – Collars Black Anodized 6061 Aluminum, Exterior Dia. 1-1/2 In., Width .394 In., Clearance Dia. 1.496 In., Screw Size M3, Screw Material 18-8 300 Series STAINLESS, Operating Temp. Range -40 Degrees to 200 Degrees F, Criteria RoHS2 Compliant, REACH Compliant
The Shaft Collar 1×3/8, 1/2″ for Key Shaft is made of lightweight Aluminum, both piece design allows you to install these collars anywhere on a shaft without removing components. Furthermore to reducing the overall weight, the flats enable you to rotate a shaft without marring or gouging the shaft. Simply place the collar on the shaft and tighten both socket-head cap screws to safeguarded the collar and a wrench and be added to the collar’s flats to rotate the whole shaft/collar assembly.
Manufactured from lightweight Aluminum
Permits you to install these collars anywhere on a shaft without removing components
Simply place the collar upon the shaft and tighten both socket-head cap screws to secure the collar
Flats permit you to rotate a shaft without marring
Climax Part C-056-S Placed Screw Collar is made with T303 Stainless Steel, which works well in corrosive environments. Measurements will be 9/16 in. Bore, 1 in. OD, 7/16 in. Width. It is powerful on hard and delicate shafts. This is a Cost effective collar design, and Very easily installed where main disassembly would or else be required.
EPT quick clamping shaft collars collar clamp hinge buy manufacturing 2 1 8 in steel,shaft collar clamp push manufacturing metal vex clamping design,vex clamping shaft collar collars 1 piece with lever clamp hinge,vex clamping shaft collar clamp 3d model production quick 1 3 8 in alum,EPT quick clamping shaft collars collar clamp 2pc 1 in steel stainless split with lever,climax metallic s shaft collar two piece clamp style EPT speedy clamping collars 2laptop or computer 1 in steel push,clamp on shaft collars couplings universal clamping collar style with mounting holes 2pc 1 in steel,shaft collar clamp pressure clamping calculation quick connect collars at best value in,clamp shaft collar clamping collars push calculation quick connect,stainless steel double split shaft collar with quick clamping clamp hinge power calculation.
Black Oxide Plated Metal One-Piece Clamping Collar.
Recessed Screw Head provides an outside surface free from important projections for safety.
Design completely engages the shaft without marring.
Greater axial holding power than established screw collars.
Effective on hard & very soft shafts.
Indefinitely adjustable and easy to remove, one-piece clamping collars are typically used on hard or gentle standard round shafts, more than a split hub or in thin wall tube. Through the use of friction to supply superior grip on pubs and shafts, solo split collars offer sturdier, more Shaft Clamp reliable results when compared to the set screw style of solid collars. In addition they offer tremendous axial power, while reducing shaft distortion for 
superior performance and decreased deterioration.
The collar clamping mechanism works quickly and effectively with simple hand opening of the integral clamping lever, positioning the collar on the shaft, and closing the lever flush with the outer area of the collar. The design of the cam on the lever and the mating machined surface on the collar assure a tight fit with a maximum axial load of 35 to 120 lbs / 133 to 489 N according to the collar bore size. In scenarios where higher holding electrical power is definitely or clamp axial load is necessary, the quick-clamping collar is not the recommended choice. EPT offers a finish line of industry-leading one-piece and two-part shaft collars suitable for these applications.