A gear drive drive requires two gears for procedure. Both gears are spur cut, and the drive gear receives drive from the energy output. The drive gear then transfers capacity to the driven gear.
Different Drive Systems
All drive systems need a drive gear. The drive gear is the primary transfer from the power source to the powered equipment. A belt from the drive gear 
to the driven equipment is a “belt driven” system. Another option is the “chain driven” system. The “chain driven” system runs on the chain from the drive gear to the driven equipment. The “gear drive” program is direct gear-drive. The drive equipment is straight meshed with the driven gear.
Common applications
Gear drives are found in transmissions, rear ends and transfer instances; at times the drive equipment will be smaller compared to the driven equipment. Different gear ratios enable the transmission to change to lower or more rpm speeds.
Automotive gear drive
Gear drives are applied to automotive engines. A “equipment drive” usually refers to the timing drive; it replaces the common timing-chain with spur-cut gears. A gear drive is known for the “whining sound” it emits. One’s teeth of the gears mesh together as the gears turn with the rotation of the engine. This continues the engine in time.