Fan Electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, removed from unused 18” or 24” China Atmosphere Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor includes a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring between your electric electric motor, capacitor and quickness control change is still installed however the cord itself is generally detached as observed in the photos. (Discover “Control Notice” below for modify type.)
T (See “Application Notice” below for make use of in various other applications.)
Dimensions: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft is certainly½” (0.500″) diameter x 2 ½” long with a collection screw simple. There are (4) threaded mounting lugs on the front of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and also to end up being on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to the next).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electric motor) is Clockwise.
Control Take notice: Motors will come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH versions in the images). These two types of switches both control the engine just as (but you possess a rotating knob and you have a pull-chain). If you order several motor at a time, we can do 
our better to supply your purchase with each one kind of control or the additional.
Application Note: Do NOT use this electric motor in a nonfan application. This is a completely enclosed fan electric electric motor and designed to have constant ventilation over the electric motor casing for cooling. The casing isn’t vented and the electric powered motor will overheat and get into automated thermal overload if run in a nonfan plan where there isn’t solid ventilation past the motor. (Caution Note: the electric motor will restart immediately when it cools back off.) Using this electric motor for applications aside from 18 & 24″ TPI fans could also overload the engine and cause it to proceed into automatic thermal overload. (Your companion blade from another Electric Fan Motor producer may possess a steeper blade position.)
Origin: This electric electric motor is manufactured in China.