“H” CLASS Refuse Drag Auto Chain Chains is utilized for conveying sawdust,wooden chips, pulp, garbage, tankage, ashes, and other abrasive spend through either wooden or metal troughs. Due to its huge, wide opening area, “H” CLASS Refuse Drag Chain provides sizeable carrying capacity when managed at moderate speeds.
Leading face of each barrel is flat, providing a wide area to push material along the trough and to keep carefully the chaim from riding over the top of the material. The rounded inner aspect of the barrel is definitely carefully shaped to create excellent sprocket get in touch with. Sidebars are reinforced with putting on sneakers which provide both
additional wearing surface and stiffening for the hyperlink. A vertical member on each sidebar assures added hyperlink rigidity and protects the pin from harm.
“H”CLASS Refuse Drag Chain is available in EVRT-POWER Promal or Duramal with a tensile power selection of 36,400 to 52,000 pounds. This tough working chain comes in a pitch range of 5.000 to 8.000 inches. Each hyperlink is stated in accordance with manufacturer’s standards and may be interchanged with links created by various other chain manufacturers. “H”CLASS Refuse Drag Chain is available in riveted construction only. Grease chambers, cored into each link’s barrel, keep grease which lubricates pins.
Wide faced sprockets, either of machined or cast metal, are recommended for”H” course Refuse Drag Chain 
procedure. Links should be run in direction of the closed barrel.
